Welcome to new 160m band blog
This blog is the replacement of the my preview Topband blog here http://topband.blog.cz/ because of an aggressive advertising and flash banners inserted by the blog provider. For older posts access You can visit the old blog link which will exist still... but it will not be updated anymore.
Effective from 1st Jan 2017 please paper QSL via OM-bureau only.
Saturday, January 4, 2014
I know that VK is not rare for big guns on TB but all the others with modest setup maybe will interesting in this short post.
Today evening 4/1/2014 at 19:00 I am sitting on the radio and listening to Steve, VK6IR on 1823.55 (according to my K3 digi readout)
Well at the beginning I was not able to hear him as my external RX antenna is out of order during rebuilding so I have to listen on my 11m apex loaded sloper. I tried to switch between all of my TX antennas and yes > I found that Steve is readable slightly above the noise with using the low profile inverted V dipole folded into Z-letter. This antenna is resonate on 5400kHz and I am using it for 60m band TX. The legs are folded into Z-letter because I have not enough space on the post stamp lot garden.
So I realized that using this antenna I am able to hear Steve, but no copy. Just I was able to say yes, Steve is there but not copied his calls.
After I tried to play with K3 AGC setting and found that when AGC SLP is set to 000 and AGC THR is increased from usual 004 to 008 value the receiver is able to pick up weak sigs a bit better. So
finally with AGC SLP 000 and AGC THR 008 + AGC PLS NOR and AGC HLD 0.00 with AGC DCY nor I was able to improve my receiving performance and read Steve's sigs even on so low level...
Interesting as K3 sounds different now and behavior is a bit strange for strong signals on band but I will have to focus on the AGC setting much more intensively in order to define the best setting for receiving weakest signals on lowbands.
What's Your AGC setting or adjustment for weak sigs on TB?
73 - Petr, OK1RP